BLUE POWER IP20 BATTERY CHARGER 24/15 (1)

Protected against overheating

A unique feature of the SinusMax technology is very high start-up power. Conventional high-frequency technology does not offer such extreme performance. Phoenix Inverters, however, are well suited to power up difficult loads such as computers and low power electric tools.

pdf
Specs sheet

Description

The Blue Power charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used. The output current will reduce as temperature increases up to 60°C, but the Blue Power charger will not fail.

Features

Adaptive 4-stage charge algorithm: bulk – absorption – float – storage:

The Blue Power charger features a microprocessor controlled ‘adaptive’ battery management. The ‘adaptive’ feature will automatically optimise the charging process relative to the way the battery is being used.

Protected against overheating and silent fan cooling

Output current will reduce as temperature increases up to 60°C, but the Blue Power charger will not fail. The load and temperature controlled fan is practically inaudible

Less maintenance and aging when the battery is not in use: the Storage Mode

The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.

Technical Data

Blue Power Charger IP 20 24/15 (1)
Input voltage range 180-265 VAC or 250-350 VDC
Frequency 45-65 Hz or DC
Minimum battery capacity (Ah) 45
Number of outputs 45-65 Hz or DC
Number of outputs 1
Protection Battery reverse polarity (fuse)

Output short circuit

Over temperature